TM
3 Avaya
S8300 Media Server: Performing Initial Administration
Verify Changes
Begin
To verify that a G700 Media Gateway has been successfully added:
type list media-gateway
1.
Figure 20. List Media-Gateway Screen
Verify that the G700 Media Gateway has registered.
2.
The y in the registered field signifies that the G700 Media Gateway has registered. If the G700
should become unregistered, the y will become an n, but the IP address will remain assigned to
the G700 Media Gateway. If the G700 has never been registered, the IP Address field will be
blank.
If the G700 fails to register, two common causes might be:
- The serial number added as the identifier for the G700 is wrong. To check, log back into the
G700 gateway and type show system. Check the serial number that appears.
- There is no IP connection between the G700 and the S8300. To check, type show mgc and
then ping mgp <controller_address> .
End
64
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002