Avaya G700 Installation And Upgrades page 95

6 Connecting a G700 Media Gateway to an S8700 Media Server Configuration:
Submit the screen.
5.
End
Task 13 — Define the IP Interfaces of the S8700 Port Network CLAN Boards
Begin
Enter display ip-interfaces to open the IP Interfaces screen.
1.
display ip-interfaces
Enable
Eth Pt Type Slot Code Sfx Node Name
y C-LAN 01c08 TN799 DP node-1
n
n
n
Note: On a pre-existing system, no changes in values are necessary. The field definitions are
explained in the table below:
Field
Enable Eth Pt
Type
Slot
Code
Sfx
Node name
Installation and Upgrades for G700
555-234-100 – Issue 1 – May 2002
Page 1 of 2
IP Interfaces
Subnet Mask
255.255.0.0
255.255.255.0
255.255.255.0
255.255.255.0
The Ethernet port must be enabled (y) before it can be used.
The port must be disabled (n) before changes can be made to
its attributes on this screen.
Either c-lan.
The slot location for the circuit pack.
Display only. This field is automatically populated with TN799
for C-LAN.
Display only. This field is automatically populated.
The unique node name for the IP interface. The node name
here must already be administered on the Node Names
screen.
Net
Gateway Addr Rgn
192.168.1_.97_ 1
Conditions/Comments
1 of 2
87