Dispaly Of The Measurement Point At The Cursor Position - Parker Compax3 Series Operating Instructions Manual

Setting up Compax3
Cursor-Position
278
By clicking with the left mouse button on the legend, this can be shifted by 90°.
By clicking on the color bar, the color of the respective graph can be modified.
Cascade diagrams
By clicking with the left mouse button on the color scale, you can change between
autoscale mode and fixscale mode.
AutoScaleMode:
In this mode, the scaling of hte color scale is adapted automatically so that all va-
lues can be displayed.
FixScaleMode:
Here, the scaling is fixed.
=> If, for instance, a considerably higher value than before is to be displayed, it is
simply displayed like the former maximum (red).

Dispaly of the measurement point at the cursor position

The cursor is set by clicking on the left mouse button. All measurement data of the
selected cursor position (frequency) are displayed in the "cursor" operating field.
192-120114 N5 C3I22T11 June 2008
Color scale
Frequency
Values on the
Cursor-Position
C3I22T11