Type Specification Plate - Parker Compax3 Series Operating Instructions Manual

Parker EME
1.2

Type specification plate

Compax3 - Type
specification plate:
You will find the exact description of the device on the type specification plate,
which can be found on the device:
10
1
2
11
3
12
Explanation:
1 Type designation
The complete order designation of the device (2, 5, 6, 9, 8).
2 C3: Abbreviation for Compax3
S025: Single axis device, nominal device current in 100mA (025=2.5A)
M050: Multi-axis device, nominal device current in 100mA (050=5A)
H050: High power device, nominal device current in 1A (050=50A)
MP10: Mains module 3AC230...480V, nominal power in 1kW (10=10kW)
D6: Nominal supply voltage (6=560VDC)
V2: Mains supply voltage (2=230VAC/240VAC, 4=400VAC/480VAC)
3 Unique number of the particular device
4 Nominal supply voltage
Power Input: 1AC = single phase, 3AC = three phase / input current
5 Designation of the feedback system
F10: Resolver
F11: SinCos© / Single- or Multiturn
F12:Feedback module for direct drives
6 Device interface
I10: Analog, step/direction and encoder input
I11 / I12: Digital Inputs / Outputs and RS232 / RS485
I20: Profibus DP / I21: CANopen / I22: DeviceNet /
I30: Ethernet Powerlink / I31: EtherCAT
C10:integrated controller C3 powerPLmC
C13:integrated controller C3 powerPLmC with Profibus
7 Date of factory test
8 Options
Mxx:I/O extension, HEDA
Sx: optional safety technology on the C3M
9 Technology function
T10: Servo controller
T11: Positioning
T30: Motion control programmable according to IEC61131-3
T40: Electronic cam generation
10 CE compliance
11 Certified safety technology
12 UL certification
192-120114 N5 C3I22T11 June 2008
Introduction
9
8
6
7
5
4
11