Maximum Operating Speed - Parker Compax3 Series Operating Instructions Manual

Setting up Compax3
4.1.9.4
138
1: Tracking error limit
2: Tracking error time
ERROR:Malfunction (state - / status word 1 Bit 3) and O0 (X12/2)
QUIT:Control word 1 Bit 7 or I0 (X12/6)

Maximum operating speed

The speed limitation is derived from the maximum operating speed. In order to
ensure control margins, the speed is limited to a higher value.
The speed setpoint value is actively limited to 1.1 times the given value.
If the speed actual value exceeds the preset maximum speed by 21% (="switching
off limit speed"), error 0x7310 is triggered.
192-120114 N5 C3I22T11 June 2008
C3I22T11