Removing The Mx10008 Router; Powering Off An Mx10008 Router - Juniper MX10008 Hardware Manual

Removing the MX10008 Router

IN THIS SECTION

Powering Off an MX10008 Router | 272

Removing an MX10008 Router From a Four-Post Rack Using a Mechanical Lift | 275
Manually Removing an MX10008 Router from a 4-Post Rack | 276
Powering Off an MX10008 Router
NOTE: Use the following procedure to power off an MX10008.
Before you power off an MX10008:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD) damage.
See "Prevention of Electrostatic Discharge Damage" on page
Ensure that you do not need to forward traffic through the router.
Ensure that you have the following parts and tools available to power off the router:
An ESD grounding strap
An external management device such as a PC
An RJ-45 to DB-9 rollover cable to connect the external management device to the console port on one
of the RCBs
To power off an MX10008:
343.
272