Removing The Ln2600 Router; Figure 11: Grounding Points On The Ln2600 Router - Juniper LN2600 Hardware Manual

Related
Documentation

Removing the LN2600 Router

Copyright © 2015, Juniper Networks, Inc.

Figure 11: Grounding Points on the LN2600 Router

1— Grounding cable lug
The LN2600 router is now ready for use. Connect the power supply and cabling as
required.
LN2600 Router Physical Specifications on page 81
LN2600 Router Power Requirements on page 83
Powering on the LN2600 Router on page 22
Installing the SFP Transceiver in the LN2600 Router on page 27
Diagnostic Tests on page 40
The interface cables on the LN2600 router are hot-swappable; power can be left on
while you remove or replace a cable without damaging the router.
Ensure that you have the following parts and tools available:
A 3/32 in Allen wrench with a torque of 5 lb-in (0.56 Nm).
Phillips (+) screwdriver
An electrostatic discharge (ESD) grounding strap
CAUTION: The LN2600 router has more than one power source. Ensure
proper care while disconnecting the DC power supply to the router.
Chapter 3: Installing the LN2600 Rugged Security Router
2— Grounding cable screws
21