Mx10008 Environmental Requirements And Specifications - Juniper MX10008 Hardware Manual

Table 27: Site Preparation Checklist (continued)
Item or Task
Rack
Verify that your rack meets the minimum
requirements for the installation of the
router.
Plan rack location, including required space
clearances.
Secure the rack to the floor and building
structure.
Cables
Acquire cables and connectors:
Determine the number of cables needed
based on your planned configuration.
Review the maximum distance allowed
for each cable. Choose the length of
cable based on the distance between the
hardware components being connected.
Plan the cable routing and management.
SEE ALSO
General Safety Guidelines and Warnings | 313
General Site Guidelines | 94
Mounting an MX10008 in a 4-Post Rack Using a Mechanical Lift | 143
Manually Mounting an MX10008 in a 4-Post Rack | 147

MX10008 Environmental Requirements and Specifications

The MX10008 router must be installed in a four-post rack. It must be housed in a dry, clean, well-ventilated,
and temperature-controlled environment.
For More Information
"MX10008 Rack Requirements" on
page 96
"MX10008 Clearance Requirements
for Airflow and Hardware
Maintenance" on page 98
The list of supported transceivers
for the MX10008 line cards is
located at MX10008 Transceivers
and Specifications
Performed By Date
92