Mx10008 Switch Fabric Board Leds - Juniper MX10008 Hardware Manual

MX10008 Switch Fabric Board LEDs

The Switch Fabric Board (SFB) has two status LEDs at the top of each board. See
Figure 43: SFB LEDs
Table 26 on page 86 describes the functions of these LEDs.
Table 26: SFB LEDs
Label
PWR
STAT
1
2
Color State
Green On steadily
Yellow Blinking
Unlit Off
Green On steadily
Green Blinking
Yellow On steadily
Unlit Off
Figure 43 on page
Description
The SFB is receiving power.
A power fault has occurred.
The SFB is either offline or not receiving power.
The SFB is online and functioning normally.
The beacon feature is enabled.
The SFB has failed.
The fan tray controller is having a power problem.
86
86.