Jnp10K-Pwr-Ac2 Power Cable Specifications For 30-A Input - Juniper MX10008 Hardware Manual

Table 40: JNP10K-PWR-AC2 Power Cable Specifications for 20-A Input (continued)
Locale Cord Set Rating

JNP10K-PWR-AC2 Power Cable Specifications for 30-A Input

The JNP10K-PWR-AC2 HVAC or HVDC power supplies requires a high current cable assembly when set
for 30-A input. One end of the cable has an Anderson APP-400 connector, the other end of the cable is
bare wire. See Figure 45 on page 113
are not shipped automatically with JNP10K-PWR-AC2 orders. An example of the right-angle cable and
connector is shown in Figure 47 on page
For connection to AC systems, Juniper provides a cable with either a NEMA 30-A connector
(Figure 45 on page 113) or an IEC 330P6W connector
Figure 45: NEMA 30-A Connector
Figure 46: IEC 330P6W Connector
Plug Standards
and Table 41 on page 114. These cables are separately orderable and
115.
(Figure 46 on page
Spare Juniper
Model Number Graphic
113).
113