Jnp10K-Pwr-Dc Power Specifications - Juniper MX10008 Hardware Manual

Figure 47: Right-Angle, Bare Cable with Anderson Connector
1 Black wire–Return (+)
—
2 Green wire-Ground
—

JNP10K-PWR-DC Power Specifications

The DC power supply (JNP10K-PWR-DC) is supported in only the MX10008 and MX10016 redundant
configuration. Table 42 on page 115
used in an MX10000 chassis.
Table 42: Power Specifications for the JNP10K-PWR-DC Power Supply
Item
DC input voltage
DC input current rating
Output power
Table 43 on page 115 shows the physical specifications for a JNP10K-PWR-DC power supply.
Table 43: Physical Specifications of an JNP10K-PWR-DC Power Supply
Specification
Height
Width
3 White wire–Neutral
—
lists the power specifications for the JNP10K-PWR-DC power supply
Specifications
Minimum operating voltage: –40 VDC
Nominal operating voltage: –48 VDC
Operating voltage range: –40 VDC through –72 VDC
60 A maximum at nominal operating voltage (–48 VDC) for each input
terminal
2500 W
Value
3.5 in. (8.89 cm)
3.6 in. (9.14 cm)
1
2
3
115