How To Install A Jnp10K-Pwr-Ac Power Supply - Juniper MX10008 Hardware Manual

NOTE: Ensure that the ejector is fully open to avoid scratching the chassis.
YES
Ejector fully open
SEE ALSO

How to Install a JNP10K-PWR-AC Power Supply | 196

JNP10K-PWR-AC Power Supply | 61
How to Install a JNP10K-PWR-AC Power Supply
The JNP10K-PWR-AC power supply in an MX10008 chassis or a MX10016 chassis is a hot-insertable and
hot-removable field-replaceanble unit (FRU). You can install up to 6 power supplies in an MX10008 and
10 in a MX10016 router chassis. All power supplies install in the rear of the chassis in the slots provided
along the left side.
CAUTION:
NOTE: See the heat symbol
tray and power supply.
Before you install a JNP10K-PWR-AC power supply in the router:
NO
Ejector closed
Do not mix AC and DC power supplies in the same chassis.
. Wear heat-resistant hand gloves while accessing the fan
Scratches
196