Mx10008 Components And Configurations - Juniper MX10008 Hardware Manual

MX10008 Components and Configurations

Table 4 on page 31 lists the four hardware configurations for an MX10008 modular chassis—base (AC and
DC versions), and redundant (AC and DC versions)—and the components included in each configuration.
Table 4: MX10008 Hardware Configurations
Router Configuration
Base AC configuration
MX10008-BASE
Base DC configuration
MX10008-BASE
Redundant AC configuration
MX10008-PREMIUM
Configuration Components
Chassis, including power bus
One Routing and Control Board
One Routing Control Board cover
Two fan tray controllers (JNP10008-FAN-CTRL or JNP10008-FTC2)
Two fan trays (JNP10008-FAN and JNP10008-FAN2)
Three AC power supplies (JNP10K-PWR-AC or JNP10K-PWR-AC2)
Three power supply covers
Five Switch Fabric Boards (SFBs)
One SFB cover
Eight line card covers
Chassis, including power bus
One Routing and Control Board
One Routing Control Board cover
Two fan tray controllers (JNP10008-FAN-CTRL or JNP10008-FTC2)
Two fan trays (JNP10008-FAN and JNP10008-FAN2)
Three DC power supplies (JNP10K-PWR-DC, JNP10K-PWR-DC2, or
JNP10K-PWR-AC2)
Three power supply covers
Five Switch Fabric Boards (SFBs)
One SFB cover
Eight line card covers
Chassis, including power bus
Two Routing and Control Boards
Two fan tray controllers (JNP10008-FAN-CTRL or JNP10008-FTC2)
Two fan trays (JNP10008-FAN and JNP10008-FAN2)
Six AC power supplies (JNP10K-PWR-AC or JNP10K-PWR-AC2)
Six SFBs
Eight line card covers
31