Disconnect A Fiber-Optic Cable From A Router - Juniper MX10008 Hardware Manual

Figure 159: Installing a Transceiver
1 Ejector lever
—

Disconnect a Fiber-Optic Cable from a Router

The router has field-replaceable optical transceivers to which you can connect fiber-optic cables.
Before you disconnect a fiber-optic cable from an optical transceiver installed in the router, ensure that
you have taken the necessary precautions for safe handling of lasers (see
and Warnings" on page
Ensure that you have the following parts and tools available:
Rubber safety cap to cover the transceiver
Rubber safety cap to cover the fiber-optic cable connector
To disconnect a fiber-optic cable from an optical transceiver installed in the router:
1. (Recommended) Disable the port in which the transceiver is installed by using the disable statement
at the [edit interfaces] hierarchy level for the specific interface.
WARNING:
fiber-optic cables. Fiber-optic transceivers and fiber-optic cables connected to
transceivers emit laser light that can damage your eyes.
WARNING:
with optical instruments even if the interface has been disabled.
2. Carefully unplug the fiber-optic cable connector from the transceiver.
330).
Do not look directly into a fiber-optic transceiver or into the ends of
Do not stare into the laser beam emitted by an interface or view it directly
"Laser and LED Safety Guidelines
269