Table of Contents
Advertisement
RELATED DOCUMENTATION
MX10008 Rack Requirements | 96
MX10008 Clearance Requirements for Airflow and Hardware Maintenance | 98
MX10008 Chassis Lifting Guidelines | 319
Unpacking the MX10008 Router and Components
IN THIS SECTION
Unpacking the MX10008 | 132
Unpacking Line Cards, RCBs, and Switch Fabric Boards | 135
Comparing the MX10008 Order to the Pack | 136
Unpacking the MX10008
After you prepare the installation site as described in
you can unpack the router.
NOTE:
The chassis is maximally protected inside the shipping box. Do not unpack it until you are
ready to begin the installation.
Ensure that you have the following parts and tools available to unpack the MX10008:
A 13/32 in. (10 mm) open-end wrench or socket wrench to remove the bracket bolts from the shipping
pallet
A box cutter or a packing knife to slice open the nylon straps and tape that seal the crate and boxes
The chassis ships in a cardboard box that has a two-layer wooden pallet base with foam cushioning between
the layers. The router chassis is bolted to the pallet base.
The shipper has the option to either ship the front panel separately or to ship along with the chassis. If
the front panel arrives with the chassis, set aside the front panel box until you are ready to verify the
contents of the order.
"MX10008 Site Preparation Checklist" on page
132
91,
Hide quick links:
Advertisement
Table of Contents
