Jnp10K-Pwr-Dc2 Power Specifications - Juniper MX10008 Hardware Manual

Table 43: Physical Specifications of an JNP10K-PWR-DC Power Supply (continued)
Specification
Depth
Weight
SEE ALSO
JNP10K-PWR-DC Power Supply | 65
JNP10K-PWR-DC Power Supply LEDs | 73

JNP10K-PWR-DC2 Power Specifications

HVDC power supplies (JNP10K-PWR-DC2) are supported in only the MX10008 and MX10016 redundant
configuration. Table 44 on page 116
MX10000 chassis.
Table 44: Power Specifications for the JNP10K-PWR-DC2 Power Supply
Item Specifications
DC input voltage
DC input current
rating
Value
14.4 in. (36.58 cm)
6 lb (2.72 kg)
lists the power specifications for the HVDC power supply used in a
Minimum operating voltage: –40 VDC
Nominal operating voltage: –48 VDC
Operating voltage range: –40 VDC through –72 VDC
76-A maximum at minimum operating voltage (-40 VDC) with 80-A dip switch setting and
5500 W output load.
64-A maximum at nominal operating voltage (–48 VDC) with 80-A dip switch setting and
5500 W output load.
60-A maximum at minimum operating voltage (-40 VDC) with 60-A dip switch setting and
4400 W output load.
50-A maximum at nominal operating voltage (-48 VDC) with 60-A dip switch setting and
4400 W output load.
116