Mx10008 Chassis - Juniper MX10008 Hardware Manual

Table 5: CLI Equivalents of Terms Used in Documentation for MX10008 Routers
Hardware
Item (CLI) Description (CLI)
Chassis JNP10008
[MX10008]
Routing and CB (n)
Control
Board
FPC (n) Abbreviated name
of the Flexible PIC
Concentrator
(FPC)
On MX10008, an
FPC equates to a
line card.
Xcvr (n) Abbreviated name
of the transceiver
PSU (n) One of the
following:
JNP10K-PWR-AC
JNP10K-PWR-AC2
JNP10K-PWR-DC
JNP10K-PWR-DC2
Fan tray JNP10008-FAN or
JNP10008-FAN2
Value (CLI)
–
n is a value in the range
of 0–1.
Multiple line items appear
in the CLI if more than
one RCB is installed in
the chassis.
n is a value in the range
of 0–7. The value
corresponds to the line
card slot number in which
the line card is installed.
n is a value equivalent to
the number of the port in
which the transceiver is
installed.
n is a value in the range
of 0–5. The value
corresponds to the power
supply slot number.
–
Item In
Documentation
Router chassis
Line card (The router
does not have actual
FPCs—the line cards are
the FPC equivalents on
the router.)
Optical transceivers
AC, DC, HVAC, or
HVDC power supply
Fan tray
Additional Information

"MX10008 Chassis

Physical Specifications"
on page 36
"MX10008 Routing and
Control Board
Description" on page 77
Understanding Interface
Naming Conventions
"MX10008 Optical
Transceiver and Cable
Support" on page 119
One of the following:
JNP10K-PWR-AC
Power Supply on
page 61
JNP10K-PWR-AC2
Power Supply
JNP10K-PWR-DC
Power Supply on
page 65
JNP10K-PWR-DC2
Power Supply
"MX10008 Cooling
System and Airflow" on
page 45
34