Listing The Chassis And Component Details Using The Cli - Juniper MX10008 Hardware Manual

Locating the Serial Number ID Labels on MX10008 Routing and Control Boards | 303
Locating the Serial Number ID Labels on an MX10008 Line Card | 304
Locating the Serial Number ID Labels on an MX10008 Switch Fabric Board (SFB) | 304
If you are returning a router or component to Juniper Networks for repair or replacement, you must locate
the serial number of the router or component. You must provide the serial number to the Juniper Networks
Technical Assistance Center (JTAC) when you contact them to obtain a Return Materials Authorization
(RMA). See "Contacting Customer Support to Obtain a Return Materials Authorization for a Router or
Component" on page 305.
If the router is operational and you can access the command-line interface (CLI), you can list serial numbers
for the router and for some components with a CLI command. If you do not have access to the CLI or if
the serial number for the component does not appear in the command output, you can locate the serial
number ID label on the router or component.
NOTE: If you want to find the serial number ID label on a component, you need to remove the
component from the router chassis, for which you must have the required parts and tools available.

Listing the Chassis and Component Details Using the CLI

To list the MX10008 chassis and the components and their serial numbers, use the show chassis hardware
CLI operational mode command.
user@device> show chassis hardware
Hardware inventory:
Item Version
Chassis
Midplane REV 05
Routing Engine 0
Routing Engine 1
CB 0 REV 05
CB 1 REV 03
FPC 0 REV 04
CPU REV 05
PIC 0
Part number Serial number
AF218
750-071974 CAGY2639
BUILTIN BUILTIN
BUILTIN BUILTIN
750-079562 CAJX5293
750-079562 CAJS5123
750-084779 CAKR7006
750-073391 CAKG1690
BUILTIN BUILTIN
Description
JNP10008 [MX10008]
Midplane 8
RE X10
RE X10
Control Board
Control Board
JNP10K-LC2101
LC 2101 PMB
4xQSFP28 SYNCE
293