Mx10008 Routing And Control Board Components And Descriptions; Mx10008 Routing And Control Board Description - Juniper MX10008 Hardware Manual

MX10008 Routing and Control Board Components
and Descriptions
IN THIS SECTION

MX10008 Routing and Control Board Description | 77

MX10008 Routing and Control Board LEDs | 80
MX10008 Routing and Control Board Description
IN THIS SECTION
Routing and Control Board Functions | 78
Routing and Control Board Components | 79
The MX10008 Routing and Control Board (RCB) is responsible for system management in an MX10008
router (see Figure 37 on page
with one RCB while a redundant configuration ships with two RCBs. When two RCBs are installed, one
functions as the master and the second as a backup. If the master RCB is removed, the backup becomes
the master if graceful Routing Engine switchover (GRES) is configured.
MX10008 supports the following Routing Engines:
JNP10K-RE1
JNP10K-RE1-LT
JNP10K-RE1-128G
78). The chassis can run with one or two RCBs. The base configuration ships
77