Dc Power Cable Specifications - Juniper MX204 Hardware Manual

DC Power Cable Specifications for MX204 Router
DC Power Cable Lug Specifications

DC Power Cable Specifications

Related
Documentation
Copyright © 2018, Juniper Networks, Inc.
DC Power Cable Lug Specifications on page 53
DC Power Cable Specifications on page 53
The accessory box shipped with the router includes the cable lugs that attach to the
terminal of each power supply.
Figure 19: DC Power Cable Lug
.25
All measurements in inches
CAUTION: Before router installation begins, a licensed electrician must attach
a cable lug to the grounding and power cables that you supply. A cable with
an incorrectly attached lug can damage the router.
You must supply four DC power cables that meet the following specifications: 12-AWG
2
(2.5 mm ), minimum 60° C wire, or as required by the local code.
MX204 Power System Description on page 21
Replacing an MX204 DC Power Supply on page 99
MX204 Router DC Power Specifications on page 49
Power Consumption for a DC-Powered MX204 Router on page 50
DC Power Circuit Breaker Requirements for the MX204 Router on page 51
DC Power Source Cabling for MX204 Router on page 52
Chapter 9: DC Power Requirements, Specifications, and Guidelines
.15 dia
.170 max
wire diameter
(insulation)
.71
.84
53