Siemens HiPath 3000 Series Service Documentation page 99

Nur für den internen Gebrauch
Telephones
Table 2-35 Points for Devices
System Interface
Analog
U devices
P0/E
IP phones
SIP phones
Data
ISDN port
Mobile Stations
Table 2-36 Points for Mobile Handsets
System Interface
Cordless Devices
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Number of devices connected via T/R wires.
Number of devices connected via U
tiPoint 500, OpenStage TDM), including adapters for data
traffic characterized by long call durations.
Number of terminal devices (e.g., OpenStage (CorNet-IP
[HFA]), connected via IP with HFA functionality.
Note: HG 1500 performance must be considered sepa-
rately.
Number of terminal devices (e.g., optiPoint 410 S, optiPoint
420 S) connected via SIP.
Note: HG 1500 performance must be considered sepa-
rately.
Number of devices for data services (for example, data ter-
minals).
Number of ISDN connections; the B channels are used for
voice and data traffic characterized by relatively short call
durations (e.g. S bus with several terminal devices but no
0
Xpression ports).
Number of CMI handsets if only one system in
the network is operated in CMI mode and only
one SLC16 is used.
Number of CMI handsets if only one system in
the network is operated in CMI mode.
Number of CMI handsets, if network wide CMI
mode is operated.
Meaning
P0/E
Meaning
System Data
Dynamic Configuration Rules
(for example, op-
Weight
6.8 · F
(6.8 + 23.0 · g) · F
(6.8 + 23.0 · g·(1-G)
+ 44.4 · G) · F
sysdat.fm
Weight
3.3 · F
Tln
7.7 · F
Tln
7.6 · F
Tln
3.6 · F
Tln
4.7 · F
Tln
12.8 · F
Tln
Tln
Tln
Tln
2-59