19-Inch Cabinet Installation For Pb3000 - Siemens HiPath 3000 Series Service Documentation

exup.fm
Expanding and Upgrading HiPath 3000
HiPath 3000Expanding
9.1.3.8

19-Inch Cabinet Installation for PB3000

Caution
7
The battery compartment including batteries and/or LUNA2 power supply must be
removed before installation!
Proceed as follows to install the PB3000 in a 19-inch cabinet:
Step
1. Attach the angle brackets (A), to attach the PB3000 with two screws on both sides
(left and right) of the frame of the 19-inch cabinet.
Note: Necessary height units for 19-inch cabinet assembly: 4 HE
(one height unit (HE) corresponds to approx. 1.7''=43 mm)
2. Attach both angle brackets (B) to the PB3000 with 2 screws on both sides (left and
right).
3. Insert the PB3000 between the angel brackets in the 19-inch cabinet (to the limit
stop).
4. Secure the two angle brackets of the PB3000 each with 2 screws on the frame of
the 19-cabinet.
5. Reinstall the battery compartment and/or the LUNA2 power supply and reattach
the front panel of the PB3000 (see Section 9.1.3.6.1 and Section 9.1.3.6.2).
The PB3000 can now be used.
9-24
B
Activity
A
C
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Nur für den internen Gebrauch