Nur für den internen Gebrauch
10.5.3
optiPoint 500 Adapters
The different optiPoint 500 adapters (not optiPoint 500 entry and optiPoint 500 economy) allow
flexible expansion of the telephone workstation by providing additional device connections
(such as personal computers, fax equipment, telephones, headsets).
The adapters, which are connected on the bottom of the telephone, are plug "n" play". When a
new telephone adapter configuration is plugged in, it generates a reset; a setup message no-
tifies the system of the new configuration.
The user usually installs the adapter. The installation instructions are on the "Electronic Oper-
ating Instructions" CD.
Caution
7
Always disconnect the line cord before connecting adapters to the telephone or re-
moving them from the telephone.
Option bays
Option bays:
2 x for optiPoint 500
●
advance (shown
here)
1 x for optiPoint 500
●
basic and optiPoint
500 standard
Figure 10-44
optiPoint 500 Option Bays
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
wclient.fm
Workpoint Clients
optiPoint 500
10-95