boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.30
TLA4R (not for U.S.)
NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
The TLA4R (Trunk Line Analog Rack) board provides four ports for the analog trunk connection
(DP and DTMF signaling methods) on HiPath 3500 and HiPath 3300 (19-inch housing). There
are also two ALUM power failure transfers.
The transmission and function-oriented characteristics of the TLA4R are completely identical
to those of the
TLA boards
are
the two ALUMs which are only available on the TLA4R.
●
the call metering receiving equipment interface, which is only on the TLA boards.
●
Interfaces
Trunk 1
:
:
Trunk 4
8 MW8
jacks
ALUM
1 + 2
Figure 3-91
TLA4R (not for U.S.) - Interfaces (S30817-Q923-Zxxx)
3-260
that are used in HiPath 3550 and HiPath 3350. The only differences
11
18
21
:
X5
88
Nur für den internen Gebrauch
50
X1
2
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
to CUPR/
CUCR