Siemens HiPath 3000 Series Service Documentation page 323

Nur für den internen Gebrauch
LED statuses and their meanings
Table 3-86 SLMAV8, SLMAV24 – LED statuses
Red LED Green
LED
Off Off
On Flashing Board performs a self-test.
Slow Off
flashing
Fast Off
flashing
Off On
Off Flashing At least one subscriber line circuit is activat-
On On
Cable and connector assignment
For connecting to the SIVAPAC connector on the backplane: Table 3-87
●
For connecting to the connector panels using RJ45 jacks: Table 3-88
●
For U.S. only: For connecting to the connector panels with CHAMP jack: Table 3-89
●
For connecting to the connector panels using SIPAC 1 SU connectors: Table 3-90 and
●
Table 3-91
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Status
Board not receiving power or not plugged in
correctly.
Board is out of order.
Board is faulty.
Loadware is being loaded.
Loading was successfully completed and
board is OK (idle state). No subscriber line
circuit is active.
ed.
Unrecoverable hardware or loadware error Replace board.
boards.fm
Boards for HiPath 3000
Peripheral boards
Action
Check plug contact on
board.
Replace board.
3-191