Evm - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Options
3.4.6

EVM

Introduction
The optional EVM (Entry Voice Mail) subboard enables the function of integrated voice mail in
HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300. The prerequisite for this is the use
of the S30810-Q2935-A301/-A401 (CBCC) and S30810-Q2935-Z301/-Z401 (CBRC) central
boards.
The EVM subboard is installed on the central CBCC and CBRC controls as follows:
Up to HiPath 3000/5000 V7:
●
The board is plugged directly into the X32 connector on the central control boards CBCC
(see Section 3.2.1) or CBRC (see Section 3.2.2) using the connector strip X2.
Caution
7
The EVM subboard must not be plugged in or out when the system is energized.
Place the central control board on a flat surface before inserting the EVM sub-
board.
The spacing bolts supplied guarantee the correct insertion of the subboard, so
you should always mount them (see Figure 3-135).
Otherwise you may damage the board.
As of HiPath 3000/5000 V8:
●
The module is securely soldered on the central CBCC and CBRC controls.
HiPath Entry Voice Mail has capacity to store up to two hours of recorded messages. You can
create up to 24 standard mailboxes and up to four of these can be configured as Auto Attendant
mailboxes (attendant mailboxes with automatic call acceptance, greeting with routing options,
day and night mode, speed dialing).
Information on administering HiPath Entry Voice Mail for HiPath 3000 can be found in the Hi-
Path 3000/5000 Manager E Help.
Caution
7
If using a different voicemail application (such as HiPath Xpressions Compact), the
EVM voice mail ports must be deactivated. To do this, set the ports to the "Standard"
station type and remove them from the active voicemail hunt group. Next set the
number of mailboxes for autoconfiguration to "0". This prevents the user making ac-
cidental changes to Call Management.
3-370
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation