Table of Contents
Advertisement
Nur für den internen Gebrauch
Bandwidth Requirements for Additional Services:
The specified values represent the load in relation to a maximum call volume of 1400 BHCA
(this is the maximum traffic with a connected call center solution).
Type
Busy signaling
(optiClient Attendant)
Call detail records
ACD information
Bandwidth Requirements for Administration (valid only for HPCO):
The specified bandwidth represents the worst case scenario. In other words, an entire CDB is
sent to the server from the HiPath node every 30 seconds (max.) as a result of the synchroni-
zation process configured in the system.
It is difficult to define an accurate value at the moment due to the lack of data from the field.
However, the bandwidth requirement will, in practice, be well below 132 Kbps, or there will be
short-term peaks during which this value will be required by the network.
In practice, the most frequent application is the call up of key programming by users. A block of
64 KB is transferred in this process. An accepted period of 30 seconds for the transmission pro-
cess results in bandwidth requirements of 18 Kbps.
Type
Synch by Hicom per TFTP
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Record size
300 bytes
200 bytes
3.5 K
Record size
607232 bytes
Startup and Administration HiPath 5000
Bandwidth requirement
3 Kbps
1 Kbps
10 Kbps
Bandwidth requirement
132 Kbps
start_h5.fm
Server Networking
6-13
Hide quick links:
Advertisement
Table of Contents
