Siemens HiPath 3000 Series Service Documentation page 68

sysdat.fm
System Data
HiPath 3000
Trunk Boards
Table 2-11 Trunk Boards for HiPath 3550
Board Capacity
Name
1
TCAS-2 2 60
TLA 2
TLA4 4
TLANI2 2
TLANI4 4
TLANI8 8
TLA8 8
TS2N 30 30
STLS2 2 4
STLS4 4 8
TST1 1 24
TMGL4 4
TMQ4 4 8
1 TCAS-2 provides two E1 CAS interfaces which, combined, can support up to 60 B channels. As HiPath 3550 supports a
maximum of 30 B channels, a total of up to 30 B channels may be used.
2 For selected countries only
2-28
Coun-
try
2
1 x - Board for supporting country-specific
CAS (Channel Associated Signaling) protocols
3
# x - Trunk board for analog lines
3
# x - Trunk board for analog lines
3
# x x Trunk board for analog lines including ALUM
3
# x x Trunk board for analog lines including ALUM
3
# x x Trunk board for analog lines including ALUM
3
# x - Trunk board for analog lines
1 x - Board for primary rate access; can be used for tie trunk traf-
fic.
In HiPath 3000/5000 V5.0 and later, the B channels in the
TS2N board are subject to license. Consequently, the
TS2N boards (S30810-Q2913-X300) have been assigned
a new hardware identification code. The new code prevents
the board from being used in earlier versions. Functionality
and layout of the board have not been changed.
3
# x - Board for ISDN basic rate access.
Configuration of ISDN trunks, tie trunks, and stations (no
3
# x x
feeding) on the same board is possible.
1 - x PRI board
3
# - x Trunk board for analog lines
3
# - x BRI board
Nur für den internen Gebrauch
Type/Description
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation