Siemens HiPath 3000 Series Service Documentation page 550

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3800
HiPath 3800
Main grounding ter-
minal
Recommended: 12 AWG solid or stranded copper wire con-
ductor not exceeding 126 feet in length; blank or green/yel-
low.
Grounding point (example: Master
Note: Single-point ground (SPG) configuration shown.
Figure 4-8 HiPath 3800 - Earth ground connection (for U.S. only)
DANGER
7
This wire installation must be completed by a qualified electrician and must comply
with the national and local electrical codes. The Section 1.6.1, "Connection to the
Power Circuit" is to be adhered to.
Grounding the Main Distribution Frame
Mount and ground the MDF in accordance with the manufacturer's instructions.
4-18
Connection cable
with plug
ground busbar)
Nur für den internen Gebrauch
Fuse box facil-
ity
Power plug
20 A
Located in the electrical service
panel providing power to the Hi-
Path 3800 system.
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
120 VAC, 60 Hz
Neutral ground