Attaching The System To The Wall - Siemens HiPath 3000 Series Service Documentation

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
4.2.3.5

Attaching the System to the Wall

Attach the system to the wall as shown in Figure 4-50.
Attaching the HiPath 3550 and HiPath 3350 housing to the wall
This is not an
attachment
point
30 cm
Minimum clearance for replacing boards
Figure 4-50 HiPath 3550 and HiPath 3350 - Wall Attachment
Figure 4-51 HiPath 3550 and HiPath 3350 - Wall Attachment
4-94
Hang system and
tighten screws
Cable
duct
Rear wall of housing
Oblong holes for wall
attachment
Nur für den internen Gebrauch
PSU/
UPS
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Attachment of
PSU
UPS
to the rear
wall of hous-
ing