Siemens HiPath 3000 Series Service Documentation page 659

Nur für den internen Gebrauch
6. Release the backplane from the rear of the HiPath system:
Figure 4-72
7. Remove the backplane from the HiPath system:
a) To remove the backplane, pull it upwards and then press it back in the direction where
there the power supply was:
b) Remove the container of the HVT connection cable from the back of the backplane (Hi-
Path 3550 only):
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
Releasing the backplane
inst_h3.fm
Installing HiPath 3000
4-127