Siemens HiPath 3000 Series Service Documentation page 242

boards.fm
Boards for HiPath 3000
Nur für den internen Gebrauch
Peripheral boards
Packing protection covering
You must remove the red packing protection covering (cardboard block), shown in the following
picture, before starting up the board.
If it is necessary to transport the board again at a later time, for example, for servicing, you must
reattach the packing protection covering.
Figure 3-39 IVMP8 and IVMP8R (not for U.S.) - Packing Protection Covering
A31003-H3590-S100-7-7620, 06/2012
3-110
HiPath 3000/5000 V9, Service documentation