Tmdid2 (For Selected Countries Only) - Siemens HiPath 3000 Series Service Documentation

boards.fm
Boards for HiPath 3000
Peripheral boards
3.3.40

TMDID2 (for selected countries only)

NOTE
>
Danger of damage to property due to surge voltage. The required lightning protec-
tion measures must be taken for this board, see Section 2.1.2, "Lightning Protec-
tion".
Introduction
TMDID2 (Trunk Module Direct Inward Dialing) provides direct inward dialing from the central
office (CO) to HiPath 3800 V6.0 SMR-10 or later.
The board has eight trunk circuits that connect to analog trunks. The board supports the proto-
cols Wink Start, Delay Dial, and Immediate Start.
Figure 3-109 TMDID2 (S30810-Q2197-T) (for selected countries only)
3-318
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation