Siemens HiPath 3000 Series Service Documentation page 662

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300
6. Release the backplane from the rear of the HiPath system:
7. Remove the backplane from the HiPath system:
a) To remove the backplane, bend the springs a little and push the backplane forward:
b) Tilt the backplane forward and pull it upward and out of the case.
8. Install the new backplane into the HiPath system.
4-130
Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation