Siemens HiPath 3000 Series Service Documentation page 189

Nur für den internen Gebrauch
Table 3-22
System
Measurement conditions:
All measurements were performed at a room temperature of approximately 22 °C
●
(71.6 °F).
The batteries were new and fully charged when measurement started.
●
Front view of LUNA2 with indicators and switches
LED for displaying the operating status
ON/OFF switch for secondary operating voltag-
LUNA2 can only be plugged in or out when
the system is switched off (switch = DC-OFF)
Switches for setting the operating mode
You can insert a screwdriver here to remove
LUNA2 from the shelf.
Figure 3-16 LUNA2 Front Panel
LED for displaying the operating status:
●
– Illuminated = LUNA2 is operating as power supply unit
– Flashing = LUNA2 is operating as a battery charger
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
LUNA2 - Bridging Times with 48-V/7-Ah Battery Pack, and Powerbox
PB3000
Power supply unit
es (system supply voltages)
Removal tab
Boards for HiPath 3000
Load levels Maximum bridg-
boards.fm
Central Board
ing time
3-57