Show Sflow - Planet SGS-6341 Series Command Manual

67.9 show sflow

Command:
show sflow
Function:
Display the sFlow configuration state.
Command Mode:
All Modes.
Usage Guide:
This command is used to acknowledge the operation state of sFlow.
Switch#show sflow
Sflow version 1.2
Agent address is 172.16.1.100
Collector address have not configured
Collector port is 6343
Sampler priority is 2
Sflow DataSource: type 2, index 194(Ethernet1/0/2)
Collector address is 192.168.1.200
Collector port is 6343
Counter interval is 0
Sample rate is input 0, output 0
Sample packet max len is 1400
Sample header max len is 50
Sample version is 4
Displayed Information
Sflow version 1.2
Agent address is 172.16.1.100
Collector address
configured
Collector port is 6343
Sampler priority is 2
Sflow DataSource: type 2, index
194(Ethernet1/0/1)
Collector address is 192.168.1.200
Explanation
Indicates the sFlow version is 1.2
Address of the sFlow sample proxy is 172.16.1.100
have not the sFlow global analyzer address is not configured
the sFlow global destination port is the defaulted 6343
The priority of sFlow when receiving packets from the hardware is
2.
One sample proxy data source of the sFlow is the interface
e1/0/1 and its type is 2 (Ethernet), the interface index is 194.
The analyzer address of the sampling address of the E1/0/1
interface is 192.168.1.200
67-6