Loader Arm Lock And Cab Tilt Procedure - Vertical Lift Machines - New Holland L213 Operator's Manual

Loader arm lock and cab tilt procedure - vertical lift machines

DANGER
Crushing hazard!
Do not enter or exit the operator's compartment while the loader arms are raised or unsupported. Rest
the loader arms on the ground or verify that loader arm is being supported by the loader arm strut or
loader arm lock pin before entering or exiting the operator's compartment.
Failure to comply will result in death or serious injury.
Raise and lock the loader arm for machine service
1. Sit in the operator's seat, fasten the seat belt, pull the
restraint bar down (if equipped), and start the engine.
2. Press the operate button to enable the hydraulics.
3. Remove the bucket or attachment from the mounting
plate.
4. Park the machine on a level surface.
5. Fully raise the loader arm.
2 - SAFETY INFORMATION
2-22
D0168A
1
20092924
2
RAPH14SSL0351BA