ELECTRO HYDRAULIC CONTROLS
Control pattern overview
Standard H control pattern
The chart below will give a description of the control lever functions. The left-hand control lever is
represented by the letter (A) and the right-hand control lever by letter (B).
(A) Left-hand control lever
(1)
Left side drive forward.
(2)
Loader arm lower.
(3)
Left side drive reverse.
(4)
Loader arm raise.
NOTE: The standard H control pattern uses both left-hand and right-hand control levers for ground drive functions.
NOTICE: Do not operate the unit until the hydraulic oil is at sufficient operating temperature.
3 - CONTROLS AND INSTRUMENTS
93100555 A1
(5)
(6)
(7)
(8)
3-12
1
(B) Right-hand control lever
Right side drive forward.
Bucket dump.
Right side drive reverse.
Bucket rollback (curl).