New Holland L213 Operator's Manual page 96

(1) KEY SWITCH (four position)
NOTE: Follow the starting procedure 4-3 de-
scribed in this manual.
Accessory position
Turn the key to the left, the machine's
electrical system is now active.
NOTICE: Do not leave the key in this position
otherwise you may drain the battery power.
Stop position
Turn the key to the Stop position. The
engine will stop and the electrical system will
be inactive to the operator.
NOTE: Some electrical components continue
to receive power from the battery.
Run position
Turn the key to the RUN position. The
machine's electrical system becomes active,
the system checks all starting criteria is met,
and prepares the engine for starting.
Start position (temporary position)
Turn and hold the key to the Start position,
release the key to the Run position once the
engine starts.
NOTICE: Do not operate the starter motor
continuously for more than 30 seconds.
(2) STOP
Severe warning requiring immediate shut
down, RED lamp will flash and audible alarm
will sound. Use the fault code that appeared
in text display and reference it in the trouble
shooting section of this manual.
(3) ENGINE MALFUNCTION
Yellow lamp will flash when an engine fault is
detected. Use the fault code that appeared
in text display and reference it in the trouble
shooting section of this manual.
3 - CONTROLS AND INSTRUMENTS
3-36
2
93109329A