New Holland L213 Operator's Manual page 143

Lifting the machine with a four-point lifting device
WARNING
Heavy objects!
Lift and handle all heavy components using lifting equipment with adequate capacity. Always support
units or parts with suitable slings or hooks. Make sure the work area is clear of all bystanders.
Failure to comply could result in death or serious injury.
NOTICE: Only personnel with heavy machine lifting ex-
perience should attempt lifting the machine. Contact your
dealer for assistance.
These machines are designed for a four-point lifting
device. Use only lifting equipment with a rated capacity
to handle the weight of the machine model being lifted.
The lifting equipment weight must be added.
1. Remove any and all attachments before lifting the ma-
chine.
2. Use the two front lift points and the two rear lift points
(one on each side).
NOTICE: To prevent damage to the cab, synthetic slings
must be used for the front lift points.
Use the correct sling lengths to ensure the proper lift hook
point above the cab is maintained for a level machine lift.
The following precautions must be followed when craning
(lifting or lowering) a machine.
• Only attach suitable lifting equipment to the machine
at the designated lift points identified with the decal
shown.
• Never allow personnel on the machine while craning.
• Secure suitable lifting equipment to the designated lift
points using hooks or shackles with the proper capacity
rating.
• Remove attachments before craning.
• Use only properly rated lifting devices.
• The weight of the lifting equipment must be added to the
machine weight for the proper lift capacity requirement.
• Always inspect the lifting equipment to confirm safe
condition. DO NOT use if worn or damaged.
• Do not attach lifting devices to the loader arms or at-
tachments on the machine.
• Make sure that the loader arms are in the lowest posi-
tion.
• Make sure that the engine is off and parking brake is
engaged before craning.
• Keep bystanders a safe distance away from the ma-
chine while craning.
5 - TRANSPORT OPERATIONS
5-3
W0398A
4
139729A1