Seat Belt - New Holland L213 Operator's Manual

Seat belt

WARNING
Equipment failure could cause accident or injury!
Always fasten the seat belt securely before you operate the machine. Inspect seat belt parts for wear
and damage. Replace any and all worn or damaged parts of the seat belt prior to operation.
Failure to comply could result in death or serious injury.
Inspect the seat belt every 50 h of operation. Contact your NEW HOLLAND CONSTRUCTION dealer if you need to
replace the seat belt.
Seat belt inspection and maintenance:
• Keep seat belts in good working condition.
• Make sure that the seat belt with or without shoulder
strap moves easily and smoothly, but with some re-
sistance from the retraction receptacle.
• Make sure that the seat belt retracts easily and com-
pletely into the seat belt receptacle.
• Make sure that the seat belt engages and disen-
gages easily.
• Check belts, buckles, retractors, tethers, slack
take-up system, and mounting bolts for damage and
wear. Replace all parts that have damage or wear.
• Replace belts that have cuts, tears, holes, or are
frayed.
• Make sure that the seat belt and seat belt brackets
are mounted securely. If necessary, tighten all hard-
ware.
• Clean belts only with soap solution and warm water.
Do not use bleach or dye on the belts because this
can make the belts weak.
7 - MAINTENANCE
7-45
W0046C
1
BD07C132I-3