New Holland L213 Operator's Manual page 265

ITEM
R
Clearance circle radius without tool
S Clearance circle radius with 1981.2 mm (78.0 in) DF
bucket
S Clearance circle radius with 1981.2 mm (78.0 in) LP
bucket
S Clearance circle radius with 1981.2 mm (78.0 in) LPE
bucket
T Clearance circle radius rear
V Over the tire width
W Overall width
Operating weight
SAE Rated Operating Capacity (ROC)
Tipping load
Counter weight (optional)
Cab side glass (optional)
Cab glass door (optional)
Cab Lexan door (optional)
Suspension seat (optional)
NOTE: Measurements are based on machines with 14 x 17.5 tires and a 1981.2 mm (78.0 in) Dirt & Foundry (DF)
bucket.
NOTE: Clearance Circle Radius (R, S, T) values were calculated using a 50/50 weight distribution (center point of
counter rotation centered between the axles) and with the bucket resting flat on ground.
9 - SPECIFICATIONS
631002258
LARGE VERTICAL FRAME (L230)
COMPONENT
10
9-11
MEASUREMENT
1399 mm (55.1 in)
2155 mm (84.8 in)
2251 mm (88.6 in)
2363 mm (93.0 in)
1789 mm (70.4 in)
1580 mm (62.2 in)
1930 mm (76.0 in)
3765 kg (8300 lb)
1360 kg (2998 lb)
2722 kg (6001 lb)
136 kg (299.8 lb)
21.3 kg (47.0 lb)
34.0 kg (75.0 lb)
34.0 kg (75.0 lb)
10.0 kg (22.0 lb)