3 - CONTROLS AND INSTRUMENTS
Two-speed function
Two-Speed Function
Press the top portion of the switch
on the left-hand
control lever to shift from first gear to second gear.
NOTE: The two-speed indicator
on the left-hand col-
umn illuminates when the two-speed function is active.
Press the bottom portion of the switch
on the left-
hand control lever once to downshift from second gear to
first gear.
1
63109409
Function-enable conditions
The two-speed function can be activated ONLY IF ALL
of the following conditions are met.
• Operator is seated properly.
• The seat belt is latched or the restraint bar (if equipped)
is down while the operator is in the seat.
• Hydraulics enable is activated.
• Park brake is not set.
• If applicable, the key switch is in the ON position.
3-28