New Holland L213 Operator's Manual page 106

(12) H / ISO control pattern selector, if equipped
This selects the drive pattern type of hand
control operation. Read the proper steps
listed in this chapter to activate.
(13) WORK LIGHTS
This knob controls the external working
lights and road lights. Work light switch
positions:
• (1) - All lights OFF.
• (2) - Front work lights ON, rear work lights
ON, rear red lights OFF.
• (3) - Front work lights ON, rear work lights
OFF, rear red lights ON.
• (4) - Front work lights ON, rear work lights
ON, rear red lights OFF.
3 - CONTROLS AND INSTRUMENTS
3-46
5
93109330