(17)
TEXT DISPLAY:
This display will show the following during
normal operation, as selected by the
operator.
• Engine Hours: Engine hours will always
be displayed momentarily when the
operator initially sits in the seat. The
operator may choose to leave engine
hours on display continuously or select
one of the following.
• Engine RPM
• Engine Coolant Temperature (degrees F
or C)
• Hydraulic Oil Temperature (degrees F or
C)
• Cycle: If this display option is chosen, the
display will continuously cycle through all
four of the above items
The text display will also help the operator
or technician with information as the SETUP
menu is utilized.
NOTE: To change display mode "on the go"
hold the AUX OVERRIDE (11) until the cur-
rent option name is displayed, push the AUX
OVERRIDE button repeatedly until desired
option name is displayed. This display mode
value will continue to be shown until another
selection is made.
3 - CONTROLS AND INSTRUMENTS
3-48
7
93109330