Hydraulic Oil Level - New Holland L213 Operator's Manual

Hydraulic oil level

Check the hydraulic reservoir oil level daily, before beginning operation or every 10 h of operation.
Hydraulic oil specification: T
for more details.
Hydraulic reservoir oil check
NOTICE: When servicing the reservoir it is important to prevent contamination. Clean the components and all areas
around the components to help reduce the risk of contamination.
1. Park the machine on a firm, level surface with safe ac-
cess all around.
2. Lower the loader arms down on the ground.
3. Lift engine compartment hood and open the rear ac-
cess door, engage lock.
4. Locate the hydraulic oil fill cap (1) and the hydraulic oil
level. (2).
NOTE: See the top figure for radial lift machines and the
bottom figure for vertical lift machines.
5. Check the fluid level. The oil level should be within the
middle one third of the sight glass (2).
6. If oil needs to be added:
A. Clean the filler cap and the area around the cap to
reduce the risk of contamination.
B. Slowly turn the filler cap counterclockwise but DO
NOT remove the cap until pressure is relieved.
C. Remove the filler cap and add oil as required.
D. Watch the site glass for proper level.
E. Replace the cap.
NOTE: Always remove the filler cap slowly.
7 - MAINTENANCE
A S ™ E
UTELA UTO UPREME
SAE 10W-30 or see the "Hydraulic oil viscosity" 7-12
NGINE OIL
7-36
1
63109366A
2
93107490