Electro-Hydraulic (Eh) Controllability Selection - New Holland L213 Operator's Manual

Electro-Hydraulic (EH) controllability selection

Setting controllability with Easy-Electro–Hy-
draulic (EZ-EH)
The Easy Electro-Hydraulic ( EZ-EH) machines have the
EZ-EH information sign located at the top of the instru-
ment cluster on the right-hand column. The following
instructions are for the shortcut to the Electro-Hydraulic
(EH) setup. Use these settings to set the speed of the
drive, lift and tilt. Also the drive and loader lift arm set-
tings.
All changes must be made with the hydraulics disabled
and the operator in the operator's seat.
1. Press and hold the AUX OVERRIDE button (1) for two
seconds to enter the EH shortcut menu.
2. SPEEd will display on the display (2). Press the AUX
OVERRIDE button (1) to select a different menu item
( DRIVE, EXIT, HOUR, HOILT, COOLT, RPM, or CY-
CLE).
3. Press the OPERATE button (3) to enter the SPEEd
menu. The current setting will be displayed.
4. Press the AUX OVERRIDE button (1) to change the
SPEEd setting.
5. Press the OPERATE button (3) to save a new setting.
If EXIT is selected, you will exit back to the top menu
level.
NOTE: If a new setting is saved, SAVEd will be dis-
played and you will exit to the top level shortcut menu.
The CTRL menu works the same as the above SPEEd
menu.
Speed Drive, lift, and tilt response to control
setting
SP-C Custom or default setting
SP-L Slow response
Medium response
SP-M
SP-H Quick response
Control Drive and loader arm response to
control lever movement
setting
CR-C Custom or default setting
CR-L Smooth response
CR-M Medium response
CR-H Aggressive response
3 - CONTROLS AND INSTRUMENTS
lever movement
3-52
1
RAIL13SSL0751BA
2
RAIL15SSL0143CA