New Holland L213 Operator's Manual page 127

(12) Loader lockout switch
If equipped, push to disable loader control
while roading the unit. The bucket and
loader arm will be locked in the position
they are in when the loader lockout switch is
pressed to the ON position. This prevents
the operator from inadvertently lowering
or raising the loader arm or bucket while
driving the machine on roads.
NOTE: A mechanical machine with the
loader lockout activated will result in an ac-
tive fault code 4952 along with an amber
lamp and buzzer. The auxiliary override but-
ton (lower left) on the instrument cluster can
be pressed to clear the display and silence
the buzzer.
illuminated.
(13) Windshield wiper switch
If equipped, this three position switch turns
the wiper ON/OFF and operates the washer
fluid spray.
(14) Blank (empty)
This location is left open for any options you
may add in the future.
(15) 12 V Power port
Supplies 12 V of power for accessories.
3 - CONTROLS AND INSTRUMENTS
The amber lamp will remain
3-67
3
RAPH12SSL0031DA