New Holland L213 Operator's Manual page 257

ITEM
R Clearance circle radius without tool
S Clearance circle radius with 1524.0 mm (60.0 in) DF
bucket
S Clearance circle radius with 1524.0 mm (60.0 in) LP
bucket
S Clearance circle radius with 1524.0 mm (60.0 in) LPE
bucket
T Clearance circle radius rear
V Over the tire width
W Overall width
Operating weight
SAE Rated Operating Capacity (ROC)
Tipping load
Counter weight (optional)
Cab side glass (optional)
Cab glass door (optional)
Cab Lexan door (optional)
Suspension seat (optional)
NOTE: All measurements are based on machines with 10 x 16.5 tires and a 1524.0 mm (60.0 in) Dirt & Foundry
(DF) bucket.
NOTE: Clearance Circle Radius (R, S, T) values were calculated using a 50/50 weight distribution (center point of
counter rotation centered between the axles) and with the bucket resting flat on ground.
9 - SPECIFICATIONS
63109355A
SMALL RADIAL FRAME UNITS (L213, L215)
COMPONENT
2
L213
2300 kg (5071 lb)
590 kg (1301 lb)
1179 kg (2599 lb)
9-3
MEASUREMENT
L215
1240.0 mm (48.8 in)
1862.0 mm (73.3 in)
1994.0 mm (78.5 in)
2112.0 mm (83.1 in)
1433.0 mm (56.4 in)
1248.0 mm (49.1 in)
1518.0 mm (59.8 in)
2430 kg (5357 lb)
680 kg (1499 lb)
1361 kg (3000 lb)
76.6 kg (168.9 lb)
21.3 kg (47.0 lb)
34.0 kg (75.0 lb)
34.0 kg (75.0 lb)
10.0 kg (22.0 lb)