New Holland L213 Operator's Manual page 26

Skid steer loader. compact track loader
Hide thumbs Also See for L213:
Table of Contents

Advertisement

DANGER
Crushing hazard!
Do not enter or exit the operator's compartment while the loader arms are raised or unsupported. Rest
the loader arms on the ground or verify that loader arm is being supported by the loader arm strut or
loader arm lock pin before entering or exiting the operator's compartment.
Failure to comply will result in death or serious injury.
WARNING
Fall hazard!
Jumping on or off the machine could cause an injury. Always face the machine, use the handrails
and steps, and get on or off slowly. Maintain a three-point contact to avoid falling: both hands on the
handrails and one foot on the step, or one hand on the handrail and both feet on the steps.
Failure to comply could result in death or serious injury.
Exit the machine
1. Lower the loader arm and or attachments to the
ground.
2. Stop the engine. The parking brake is automatically
set.
3. Remove the seat belt. If equipped, raise the restraint
bar.
4. If applicable, open the cab door.
5. Grab the hand holds.
6. Pull yourself up and place one foot on the loader arm
coupler step or on the bucket step.
7. Position your hands on the hand holds so that you are
comfortable with stepping out of the cab.
8. Step out of the machine and turn your body so that you
face the machine.
9.
Look and make sure that the ground area is clear to
step off of the machine.
10. Position your hands so that you are comfortable with
stepping off of the machine.
11. Place one foot on the ground.
12. Place the other foot on the ground and safely move
away from the machine.
2 - SAFETY INFORMATION
2-10
D0168A
W0141A
3
931002285
4
931002286

Advertisement

Table of Contents
loading

This manual is also suitable for:

200 seriesL223L215L225L218L230 ... Show all

Table of Contents